I have a pattern that I’d like to use that calls for 8/2 cotton. However, my best quality cotton is 22/2. What substitutions do I have to make in terms of ends per inch, reed size, etc?
Here is a dilemma: I have inherited several cones of two different yarns and would like to make a table runner, but I'm not confident in how to approach it.
I am weaving a small table runner using 3/2 pearl cotton for warp and weft (red and green in the warp, white in the weft). I used a draft (#479, page 129) from Carol Strickler's A Weaver's Book of 8-Shaft Patterns, which I've modified a little.
I'm having a warp tension problem. After weaving a while, the edge warp threads are very tight and the center very loose, but all were even when I started.
I have just wound a warp that took way too long to wind and I'm wondering if there is a better way.
I am weaving a silk scarf in huck lace and noticed that about four inches back I had made a serious treadling error. What can I do?
I had no idea how difficult woven rep was going to be—the threads are twisting between the reed and the heddles as I wind on. What else can I do?
There are two typical methods for handling floating selvedges. One is to wind and beam the floating selvedge with the rest of the warp...
Yarn tracking is something that happens to some yarns when they are woven in plain weave—but why and how?
